SV01S

Precise coating for high viscosity materials without over spraying

Precision coating spray valve, SV01S, can apply materials with viscosity as high as 30,000 mPa·s. SV01S is ideally designed for applications of silicon, UV adhesive, or grease, which are likely causing splattering in dispensing. Different type of nozzle and air can be used with the valve to optimize a spray pattern.

Specifications

Nozzle and Cap selection based on coating width

How the Valve Operates 

Input air pressure retracts the needle from the nozzle seat, allowing fluid to flow. At the same time, nozzle air flows around the nozzle and atomizes the fluid into fine droplets. (Figure 1)　Once the cycle is completed, the spring returns the piston needle back to its position to shut off the fluid. (Figure 2).

​​